Target Sports Solutions is proud to introduce our new lineup of rear entry internal action wrenches!
Specifications:
Compatible with ALL Gen 1 & Gen 2 Ruger American Rifles
4140 Pre-Hardened Steel Construction with Black Oxide Finish
3/4" Drive Socket design to properly torque actions to barrels
Improved Gen 2 Design
The Gen 2 Design: TSS went back to the drawing board looking for continuous improvement of our products and found a way to further refine our material properties and action wrench shape. By retaining a full bolt body diameter through the bolt lug engagement area, we were able to improve our wrench strength by 20%, helping with the most stubborn factory barrels and further eliminating the potential for action twisting.
Please Note: Some Howa actions are known to be especially tight and may require a competent gunsmith to cut a stress relieving slice on the factory barrel in front of the receiver. This tool will not harm your action around 175 Ft-lbs and can risk breaking around beyond 225 Ft-lbs. Please use good judgement - using this tool in a way that breaks it exceeds its design intent and can damage your action. We will not accept returns for broken tools and recommend that if a barrel does not come off around 125 Ft-lbs, you have a stress relief cut performed on the barrel.
Target Sports Solutions is proud to introduce our new lineup of rear entry internal action wrenches!
Specifications:
Compatible with ALL Long & Short Action Remington 700 pattern Rifles. Compatible with most clones, if it is a pure R700 clone, it should fit, similar to R700 clones may require checking the compatability chart.
4140 Steel Construction with Black Oxide Finish
3/4" Drive Socket design to properly torque actions to barrels
Properly supports the action to avoid exterior finish damage
Please Note: This tool will not harm your action around 175 Ft-lbs and can risk breaking around beyond 225 Ft-lbs. Please use good judgement - using this tool in a way that breaks it exceeds its design intent and can damage your action. We will not accept returns for broken tools and recommend that if a barrel does not come off around 125 Ft-lbs, you have a stress relief cut performed on the barrel.
Target Sports Solutions is proud to introduce our PRO lineup of Rear Entry Internal Action Wrenches.
Specifications:
Compatible with ALL Tikka T3 & T3x Rifles
4140 Pre-Hardened Steel Construction with Black Oxide Finish
3/4" Drive Socket designed to properly torque actions to barrels
Identification Engraving
Improved design that retains full bolt body diameter engagement
The improved full-length bolt diameter design nearly doubles the strength of the wrench compared to a flat torquing surface design, giving you the best chance to remove the worst stubborn factory barrels. The production of action wrenches of this design is far more costly, but results in a wrench able to take abuse and withstand a lifetime of serious use.
Please Note: Tikka actions are known to be especially tight and may require a competent gunsmith to cut a stress-relieving slice on the factory barrel in front of the receiver. This tool will not harm your action around 175 Ft-lbs and can risk breaking around beyond 225 Ft-lbs. Please use good judgment - using this tool in a way that breaks it exceeds its design intent and can damage your action. We will not accept returns for broken tools and recommend that if a barrel does not come off around 125 Ft-lbs, you have a stress relief cut performed on the barrel. For factory barrel removal, we recommend using penetrating oil and heat before applying torque. Note: Only one wrench per purchase.
Target Sports Solutions is proud to introduce our PRO lineup of Rear Entry Internal Action Wrenches.
Specifications:
Compatible with ALL HOWA 1500 MINI Actions and Calibers
4140 Pre-Hardened Steel Construction with Black Oxide Finish
3/4" Drive Socket designed to properly torque actions to barrels
Identification Engraving
Improved design that retains full bolt body diameter engagement
The improved full-length bolt diameter design nearly doubles the strength of the wrench compared to a flat torquing surface design, giving you the best chance to remove the worst stubborn factory barrels. The production of action wrenches of this design is far more costly, but results in a wrench able to take abuse and withstand a lifetime of serious use.
BLEMISHED OPTION: These wrenches are perfectly functional like a normal wrench, but have some finish issues. They won’t win any beauty contests, but we pass the savings on to you!
Please Note: Howa 1500 actions are known to be especially tight and may require a competent gunsmith to cut a stress-relieving slice on the factory barrel in front of the receiver. This tool will not harm your action around 175 Ft-lbs and can risk breaking around beyond 225 Ft-lbs. Please use good judgment - using this tool in a way that breaks it exceeds its design intent and can damage your action. We will not accept returns for broken tools and recommend that if a barrel does not come off around 125 Ft-lbs, you have a stress relief cut performed on the barrel. For factory barrel removal, we recommend using penetrating oil and heat prior to applying torque. Note: One wrench per purchase.
Target Sports Solutions is proud to introduce our new lineup of rear entry internal action wrenches!
Specifications:
Compatible with ALL Howa 1500 Actions (NON-Mini) and Calibers
4140 Pre-Hardened Steel Construction with Black Oxide Finish
3/4" Drive Socket design to properly torque actions to barrels
Improved Gen 2 Design
The Gen 2 Design: TSS went back to the drawing board looking for continuous improvement of our products and found a way to further refine our material properties and action wrench shape. By retaining a full bolt body diameter through the bolt lug engagement area, we were able to improve our wrench strength by 20%, helping with the most stubborn factory barrels and further eliminating the potential for action twisting.
Please Note: Some Howa actions are known to be especially tight and may require a competent gunsmith to cut a stress relieving slice on the factory barrel in front of the receiver. This tool will not harm your action around 175 Ft-lbs and can risk breaking around beyond 225 Ft-lbs. Please use good judgement - using this tool in a way that breaks it exceeds its design intent and can damage your action. We will not accept returns for broken tools and recommend that if a barrel does not come off around 125 Ft-lbs, you have a stress relief cut performed on the barrel.
No results match your search. Try removing a few filters.
